Industrial high pressure washer as a specialized mechanical device is widely used for washing and removing deep layers of pollution. They use high-pressure water to wash and clean all contaminants sticking to surfaces. Since workshops and industrial environments are exposed to high volumes of contaminants, the use of specialized equipment and devices such as industrial high pressure washer is an ideal solution for washing and removing deep layers of contaminated accumulation in these environments. Industrial high pressure washer devices, based on the water temperature of the outlet are classified into two categories: hot water and cold water. Having sufficient and comprehensive information on each of the hot and cold water devices and the characteristics of each can be a good guide for choosing the right device.
Industrial cold water high pressure washer is a mechanized device widely used for washing and removing deep layers of contamination. Generally, industrial high pressure washer machines are able to isolate pollutants by using mechanical force applied to the contaminant particles through high-pressure water. The use of high-pressure water for washing and cleaning has made these machines highly capable of eliminating contaminants and, therefore, widely used in residential, commercial, office and industrial environments. But these devices are time consuming to wash greasy, greasy and sticky contaminants and sometimes require detergents. In such a situation, using hot water high pressure washer is a very ideal and cost-effective solution.
The industrial hot water high pressure washer is a mechanized device that, by spraying high-pressure water with high temperature, has a high ability to wash and remove deep layers of greasy grease contamination. These devices are fitted with a heater system to increase the water temperature. However, since hot water enters the pump, it damages the pump; the industrial water heater system always comes after the pump. In other words, the water first enters the pump and, after increasing the pressure, enters the heating system to increase the temperature. The use of industrial hot water high pressure washer for washing and removing fatty and oily pollutants in comparison to cold water appliances increases the speed of operation and reduces water consumption.