Industrial Detergent Dopomat-forte


compare with other products
brand : Kiehl category : Industrial Detergent code : j050210

Dopomat-forte is an alkaline and very efficient detergent for cleaning surfaces. This detergent has low foam and contains active substances. This detergent has a high ability to efficient cleaning and removing oily and electrostatic contaminants such as oil, soot, deposits of dirt, grease, graphite and contamination is caused by incomplete combustion gases.


This detergent has a wide range of application in cleaning of surfaces in industrial areas, workshops, shed roofs and the floor surfaces in the metro or underground stations.  In general, the Dopomat-forte can be used in the cleaning of surfaces which are water and alkali resistant such as concrete, brick, tile, wired glass. It is also usable for cleaning waste bins.  The Dopomat-forte is not suitable for using on the rubber or aluminum surfaces. 


Before using this detergent, all over the surface, for being sure of the resistivity of the surface, test a little spot at first. The Dopomat-forte is a concentrated detergent and for using in the cleaning, should be diluted in the right amount of cold water (depending on the cleaning device). With the use of the floor scrubber dryer, dilute the 100 ml of the detergent with 10 liter of cold water. For use high pressure washer, dilute the 200 ml of detergent into the 10 liters of cold water and for stripping surfaces whit polisher dilutes 1 liter of detergent with 10 liters of cold water.


Dopomat-forte contains anionic surfactants less than 5%, non-ionic surfactants less than 5%, phosphonates less than5%, water soluble solvents, corrosion resistant materials, alkalis and dyes. The pH of concentered form of Dopomat-forte is about 13, and in diluted form become about 11.5. 


Dopomat-forte contains Sodium Hydroxide and it is used for professional use so, it is not suitable for consumer use. This detergent is so alkali and in contact with skin or eyes, causes severe burns, if contact with eyes or skin, wash the position with water for several minutes. During work with this detergent, using protective coverings is necessary. 

technical specifications

general specifications

Color Blue
Concentration Concentrate
productivity (mL/m2) 1 to 8 ( cleaning ) / 40 ( Stripping )
pH (Concentrated) 13
pH (Ready to Use) 11.5

Cleaning Specifications

Material of Cleaning Surfaces All Water and Alkali Resistant Surfaces Except Coated Floor Coverings, Linoleum, Rubber or Aluminium
Places Warehouses - Industry
Contamination Soot, Graphite and Oily Contamination
Combined Ratio with water in Scrubber Dryer 1 : 100
Combined Ratio with water in Polisher 1 : 10

need more info

related products


quick access to products