industrial carpet cleaner - r3

compare with other products
brand : Tennant category : carpet extractor code : 0

tennant r3 carpet cleaner is one of the most efficient mechanized cleaning devices for carpet cleaning. the cleaning width of this machine is 38 cm and it performs cleaning of carpet surfaces with a single pass. the r3 carpet cleaner has two roller brushes equipped with a water spray system to remove contaminants and stains on the carpet surface. these brushes with a rotating mechanism in the opposite direction remove the stains and contaminants with high performance from the surface. also, the suction system of this powerful device transmits a high volume of water and pollution into the dirty water tank.

the compact dimensions and design of the device allow it to be used in dense environments and narrow passages. also, this device is suitable because it has low sound levels for use in sound-sensitive environments. if  r3 carpet cleaner has been used , the water consumption will be reduced to 80% and the other device will be able to suction more than 90% of the remaining water between the carpet. as a result, the growth of bacteria and fungi is prevented and the problem of bad odor due to the wetness of the carpet is completely eliminated. also, the rapid drying of the water by the machine reduces the risk of slipping of people during passage.

the r3 carpet cleaner uses a 15-meter power cord to supply the requirement power of the device, which allows it to be used as desired duration. this r3 carpet cleaner has two clean and dirty water tanks with a capacity of 19 liters, which allows water to be sprayed and collected. the ease of use thanks to the mechanism and simple control panel, reducing costs and service janitors is another benefit of this efficient cleaning device.

technical specifications

general specifications

working width (mm) 380
power cable length (m) 15

pump specifications

operating pressure (bar) 4.5
water output (liter/min) 76

tank specifications

solution tank capacity (L) 19
recovery tank capacity (L) 19

brush specifications

number of brushes 2
brush type Roller
brush speed (rpm) 450
Main brush length (mm) 380
power of brush motor (W) 220

suction unit specifications

type of vacuum motor 2 Stage
Power of vacuum motor (W) 890
waterlift max (mh2o) 2180
air flow max (m3/h) 168

motor and power supply specifications

power (KW) 1320
voltage - frequency (V - Hz) 230 - 50

physical specifications

noise level (db) 69
weight (kg) 53
dimensions (L×W×H) (mm) 750×490×710
wheel diameter (mm) 200

need more info