RF 40 escalator and moving pavement cleaning unit is an advanced scrubber which is specially designed to wash the steps while moving or stopped. The machine is technologically patented and is supplied with an industrial sweeper. The unit can be used by the operator and it can operate automatically as well.
As a very functional machine, RF 40 is equipped with two cylindrical brushes with a length of 170 mm, which are used for both horizontal and vertical surfaces of the escalator. To switch from horizontal surfaces to vertical ones or vice versa, it will be enough to turn the brush head with a manual lever. Taking advantage of a cleaning width of 520 mm, a solution tank with a capacity of 20 liters and a recovery tank of 60 liters have added to the machine efficiency and reduced the cleaning time to the least possible.
Applying RF 40 in escalator cleaning operations won’t require the operator to separate the escalator plate and riser apart which leads to a remarkable decrease in costs. Another important advantage to take into account is that using RF40 won’t impose any restriction in terms of when to activate the escalator again and it can be used not long after the operation. On the other hand, the sweeper that comes with RF40, vacuums the detergent and remaining dirt in and leaves the surface dry and clean in a fast manner. No moisture will penetrate the internal components, thus there will be no danger and the unit won’t get hurt. All types of escalators can be cleaned by RF40 easily and efficiently.
RF40 Escalator-Cleaning Unit
RF 40 is a scrubber with special features and purposes that can be used for washing all types of escalators and moving pavements. Some very distinguishing features of the unit will be mentioned as follows.
Efficient Cleaning of Vertical and Horizontal Surfaces
RF 40 is capable of washing both vertical and horizontal surfaces of escalator plates efficiently. In order to wash horizontal plate surfaces, the unit will be placed on the floor, on the bottom of ascending steps and moves slowly from right to left and finally moves back. The unit stops on the left and the whole escalator will be cleaned in the same way gradually. In addition to that, the unit can work autonomously as well. When working autonomously, the machine is transferred from side to side. In order to wash vertical surfaces, the unit
will be turned off and so all surfaces will be cleaned very easily.
Cleaning Parameters Adjustability
An outstanding feature RF40 has, is the adjustability of detergent splash. Through this feature the machine will adjust the splash rate for horizontal and vertical surfaces separately at three different levels. Therefore, the splash rate can be adjusted depending on how dirty the surfaces are. As a result of this feature, the cleaning quality will be improved
Quick Set up
As another peculiarity, the machine takes advantage of simultaneous activation of all operators of the machine, as a result of which it will take a very short time to activate the unit. This very feature works at facilitating setting up and beginning the operation and will consequently result in speeding up the operation.
Easy to be transferred
RF 40 comes with a trolly which carries the sweeper and the washing unit. That might be why it can be easily transferred in different environments. The light weight of the machine has also facilitated its transfer to a large degree.
RF40 escalator cleaning scrubber is quick to set up and easy to trigger thus the operator can start working with the machine effortlessly. The machine is equipped with an ergonomic handle which facilitates the work for the operator and the cleaning procedure won’t cause the operator feel fatigued.