Gommasol is a solvent-based cleaner and as the appearance
feature of it, can mention to its low odour and Easy application. It is
designed for removing of rubber streaks and rubber residues that caused by
industrial machines on industrial floors. This solvent cleaner has a high
cleaning effect, and can be used in very dirty industrial and storages floors.
GOMMASOL USAGE IN CLEANING
This solvent has a wide range of Application and can be
used on all covering’s floor which are solvent resistant, such as epoxy resin,
industrial floors, concrete, magnesite screed floors and clay floor tiles. But
it is not suitable for using on the surfaces which contain asphalt or bitumen
or on synthetic floors.
HOW TO USE GOMMASOL IN CLEANING
There are three directions on using this solvent for
removing the solid, depending on the level of the dirt. For a light dirt, Fill
Gommasol (undiluted or diluted with water 1:1 to 1:2) into an appropriate spray
application tool with foam nozzle and spray it onto the floor and allow to act
for about 10 minutes. If the floor is normally soiled or if the product is applied
locally, the dirty solution can be removed by mechanical wet cleaning with the
automatic scrubber and a 1% solution of Dopomat-forte as part of the routine
cleaning and If the floor is heavily soiled or if the product is applied on a
large surface, after spraying scrub the surface thoroughly with the polisher,
which is equipped with pad. Then vacuum the dirty solution and rinse off
thoroughly with clear water.
INGREDIENTS
The Ingredients of the Gommasol are the nonionic
surfactants 5-15%, water-soluble solvents and additives. The pH value of the
concentrate solvent is approx. 6. And the pH value of ready-to-use
solution is approx. 7.
ESSENTIAL TIPS
This product is only for professional use and during the
using it, following these tips is essential: do not be swallowed, if swallowed,
rinse mouth and do not induce vomiting. After contact with skin or if inhaled,
causes skin irritation. In contact with eyes, causes serious eye irritation, so
rinse cautiously with water for several minutes, remove contact lenses and
continue rinsing. And should use only outdoors or in a well ventilated area. It
is essential to wear protective gloves/eye protection during the use of
it.