IBC General cleaner detergent

compare with other products

In industrial environments such as factories, warehouses and garages, pollution has a great variety, though many detergents have been designed and manufactured with their own formulations. They have the potential to eliminate such contaminants. When deciding whether to buy detergent in industrial applications, it is important to consider the type of contamination and the type of the floor. General cleaner detergent can be considered as one of the most used among different types available in the market.

General cleaner features

In pure form has a pH of about 8-9. Due to the specific formulation it does not damage the polymer, metal surfaces, as well as the epoxy coating and paint surfaces.

How to dilute the detergent

To achieve maximum performance, dilute it according to the instructions and information available on each detergent. General cleaner detergent should be mixed with water at a ratio of 1: 50 to 1: 100 if sprayed. This ratio is determined by the amount of contamination.

Operation with scrubber

The surface cleaning of industrial environments may be performed by a scrubber. In this case, General Cleaner detergent can always be used. In this case the material should be mixed with water in the ratio of 1: 100 to 1: 200.

safety tips

In order to prevent damage to the user it is recommended to wear gloves and glasses when using industrial detergent. It is also advisable to test some of the material on a small portion of the surface first, and ensure full compatibility of the material with the surface and then widely use the detergent.

Advantages of Industrial Detergent

some advantages are:

- Increasing power and ability to eliminate all types of stubborn and fixed contaminants

- Optimize and reduce water consumption due to reduced washing times while increasing the quality

- Maintain surface health and extend its useful life when choosing the right industrial detergent

technical specifications

Cleaning Specifications

Material of Cleaning Surfaces Epoxy, metal, polymer
Combined Ratio with Water in Manual Methods 1:50-1:100
Combined Ratio with water in Scrubber Dryer 1:100-1:200

تماس با کارشناسان فروش