The ride on floor scrubber ARA100BM150 is produced by the German Columbus company. The working width and the suction width of this ride on floor scrubber respectively is, 1000 mm and 1380 mm, and the capacity of the solution tank is 150 liters, the capacity of the recovery tank is also 150 liters and hence it is a good option for cleaning and washing larger areas up to 7500 square meters such as hospitals, shopping malls, exhibitions and terminals.
Since the ride on floor scrubber ARA100BM150, is equipped with seat and the operator sits on the device, gets less tired and has more ability to continue its activities. The downward pressure, which is applied on the brush of the ride on scrubber dryer ARA100BM150, is equal to 100 kg and so considerably increases the quality of device’s cleaning. Since the drain hose of this model of floor scrubber is installed at the lowest point of the recovery tank, the dirty water can dose or completely drain from the tank. In order to observe and comply with the standards of HACCP, the dirty water tank is smooth, without undercut design and easily accessible and thus easy to clean.
The battery of this device has a high capacity and can work up to 5 hours. After pressing the automatic button, the brush head and the suction foot of the device are lowered into the standby position, and the accelerator pedal activates all the functions, the brushes move to the desired working position with the appropriate brush pressure. According to increase the efficiency even in confined spaces, this ride on floor scrubber can turn in a small circle just 2 meters. For safe holding and parking, the ride on floor scrubber ARA100BM150 is equipped with parking brake, and so after parking, the device cannot move.