high pressure washer - W 19-180

compare with other products
brand : Kranzle category : Industrial Pressure Washer code : W 19-180

W 19/180 stationary high-pressure cleaner is one the Kranzle compact products which are available for cold water preparation. The stationary and strong design of this high-pressure cleaner causes the machine not to get damaged easily. This practical machine can deliver water with pressure up to 180 bar and water flow up to 19 liter per minutes. The operating pressure and spray rate can be steplessly adjusted by turning the handle.

Stainless steel housing, stainless steel manometer and a total stop system come as standard equipment. After the gun is closed the device continues to run for almost 30 seconds then cuts out. This mechanism serves to protect the technical components in case of an immediate safety stop. The machine restarts when the gun is opened. By applying the safety catch on the spray gun, the danger of unintentional spraying is eliminated.

The housing, the lance and all the machine parts which come into contact with water, are made of stainless steel so the machine is strong enough to be used in the tough industrial operation and its failure due to corrosion is impossible. Using stainless steel components let the machine be used in food industries.

Kranzle W 19/180 high-pressure washer is equipped with a water tank which can be connected to the water mains with the pressure of 2 to 8 bar. This water tank protects the pump against damage caused by lack of water. In addition to protective features and system, the pump is made of highest quality materials and components such as brass head pump and ceramic coated stainless steel plunges. This machine is also equipped with additional electrical over-current protection.

This electric cold water high-pressure cleaner runs on three phase power and it is supplied with a 7.5-meter power lead. The machine is equipped with a slow running, quiet and durable four-pole motor. The low speed of the motor (1400 rpm) reduces starting current, noise and wear.

technical specifications

general specifications

max admissible over pressure (bar) 200
water tank yes
total stop system yes

pump specifications

operating pressure (bar) 30-180
water output (liter/min) 19
inlet water temperature, max (˚C) 60
nozzle size 07

motor and power supply specifications

motor type electric
power (KW) 7.5
voltage - frequency (V - Hz) 400/50

physical specifications

high pressure hose length (m) 10
weight (kg) 80
dimensions (L×W×H) (mm) 780×700×360
برای اطلاع از قیمت ها و آخرین محصولات با ما در ارتباط باشید ۸۷۱۸۴-۰۲۱